Die Buttons Manufacturers & Suppliers In India.

-

 DIE BUTTONS MANUFACTURERS & SUPPLIERS IN INDIA 

Die Buttons Information-

                                                  A die button is hardened steel that provides the opposing cutting edge for a punch during the punching process. During this operation the slug or blank being stamped, passes through the opening of the die button.  

We at Competent Engineers are emerged as a leading brand for manufacturing and supplying the die buttons products in India. There is many industries like to have the punches products on demand, so that we have the order to the companies and fill up the required product demand.



Die Button Matrix Requirements-

                                                                            The die button provides a hardened cutting edge to facilitate slug separation. The cavity (or hole) accepts the slug and must be long enough to permit a satisfactory number of sharpenings. The die hole shape conforms to the punch point; however, the hole is larger to provide for the necessary clearance. Below the wear land, the die hole is enlarged to permit unrestricted slug travel. 

Die button relief holes are divided into two groups:counter vs, taper relief die buttons

  1. Counter-bore - Counterbore relief die buttons are the standard catalog item.
  2. Taper relief -  Taper relief die buttons are only available upon request.

The construction type is referred to as stepped when the hole is larger at the intersection with the bottom of the wear land. The balance of the relief hole may be tapered or straight and may not conform with the shape of the die cavity. No-step construction requires that there be no step at the intersection with the wear land and that the relief hole be tapered to conform with the die cavity shape.

Both construction types are available in headless or headed types. The headless type must be press- fitted for retention. Headed die buttons may be slip-fitted to avoid distortion of the retainer plate when large numbers must be inserted. The larger bearing surface provided by the head also results in better load distribution.

HSS Die Buttons-

                                        We offer HSS Die Buttons in various sizes as per customer requirement. The Die Buttons are manufactured using imported HSS- M2 Grade Steel, D2 Steel, and as per customer demand with good quality material and with high precision. The product is Harden and Tempered using the best quality Heat Treatment Process to 60/62 HRC  Level.

Call on Or Whatsapp 9599404177 for the best quality HSS Die Buttons manufacturers & suppliers in India. We at Competent Engineers provide top quality HSS Die Buttons which are used in press tool. We have a dedicated team and good infrastructure to deliever better results.









Competent Engineers Sale All Press Tool Parts!

Whatsapp Catalog On Die Punches.
Please View Catalog.

                                                                       https://wa.me/p/4059933804102750/919599404177

                                                                                       Contact us :
Mobile No.(Whatsapp) : 9599404177
                                         Email Id : ceindia77@gmail.com
Address : 241, sector 8, IMT Manesar, Gurugram, Haryana 122050




                               

Location: 241, Sector 8, Imt Manesar, Gurugram, Haryana 122050, India

Comments

Post a Comment

Popular posts from this blog

Guide Pillar And Bush Manufacturers & Suppliers In India.

-
Image
 GUIDE PILLAR AND BUSH MANUFACTURERS & SUPPLIERS IN INDIA  Guide Pillar Information-                                                      A standard injection mold is split into the injection side and the ejection side. When the mold is closing, the two halves of the mold are centered through the guide pillars. In most cases, the guide pillars are fixed on the injection side. Guide Pillar GPP Guide Pillar GPR Guide Pillar GPP-                                          Guide Pillars are an integral part any press die set. They help with the alignment of the top and bottom die plates. These guide pillars, also known as guide pins, fit accurately into the bottom hole of the base die plate, imparting a high degree of precision to the press-punching die setup. Top Guide pillar manufacturers like Competent Engineers use high-quality case-hardened steel, Hot-rolled steel or cast iron and steel mix to produce effective and durable products of this type. Guide pillars work in conjunction wit
Read more

Ejector Sleeve Manufacturers & Suppliers In India.

-
Image
 EJECTOR SLEEVE MANUFACTURERS & SUPPLIERS IN INDIA  Ejector Sleeve Information - The function of an ejector sleeve in a mold is  to eject either an entire finish molded piece part or apply ejection force to some portion of the molded piece part to assist with part ejection , in combination with other ejection features designed into the mold. Straight Ejector Sleeve Stepped Ejector Sleeve Straight Ejector Sleeve - The precision-engineered straight ejector sleeve is of seminal important when it comes to considering the significance of various injection mould accessories. Depending on the various needs of the machines and the requirements of molded products, this sleeve has a tremendous use in the molding business. Coming with an annealed head, this sleeve is available in different diameters and size; so that it can easily meet the constantly varying product needs of the mould manufacturers. Being manufactured by following the guidelines, defined by the industry, it offers the best se
Read more

Collets Manufacturers & Suppliers In India.

-
Image
 COLLETS MANUFACTURES & SUPPLIERS IN INDIA  Collets Information -                                               Many people, if approached on the street and asked for a definition of a collet, would likely develop a blank stare. Collets are integral parts of machining, and yet so many don’t know what they are or misrepresent them as chucks. As Competent Engineers Tool is known for their quick change tool holding systems, they know a thing or two about collet types, their capacity and the significance of these misunderstood and often underappreciated devices. A collet is a form of chuck, but it is not identical. While a chuck is tightened around an object, a collet utilizes clamping pressure by forming a collar around the object being held, holding it securely in place. This clamping force is typing applied through a tapered design that uses a sleeve and inner cylindrical surface. While there are varying designs, all collet types operate by being pressed over the element to be held,
Read more